Electrical Connection - Virtus H 80 Series Operating Manual

PART A: Basic machine
Granulator
H 80 Series
6.4

Electrical connection

 For machines, which have been supplied none pre-wired by
HINT
 VIRTUS 2023, All rights reserved
WARNING
Dangerous voltage.
Touching live parts can lead to serious injury or death.
All work which relates to the electricity of the machine may
only be carried out by trained electricians.
Observe the currently effective EMC regulations.
Voltage, current, frequency and protection are marked on the Type
plate. The voltage tolerance is ± 10%.
VIRTUS the electrical connection, is to be carried out in accord-
ance with the enclosed Wiring diagram in the terminal box.
When doing this, the regulations of the local electricity authority
are to be adhered to. The cable cross section required is to be
determined according to the rated capacity of the units.
WARNING
When operating specific equipment caution must be taken
to prevent electrical shock. Installation, service, alterations
and or modifications must only be done by qualified per-
sonal and with up most safety. Not conforming to the re-
quirements could result in bodily injury, death or costly
damage.
Alterations to the wiring diagrams from VIRTUS require our
approval. Failure to do this will exclude all guarantee
claims.
The wiring schematics are located in the control panel in the
event that the control panel is a part of the delivery.
Page 44