Electrical Dangers; Dangers Caused By The Control System - Virtus H 80 Series Operating Manual

Table of Contents

Advertisement

PART A: Basic machine
Granulator
H 80 Series
4.8.2

Electrical dangers

4.8.3

Dangers caused by the control system

 VIRTUS 2023, All rights reserved
Danger:
Direct or indirect contact with live parts in the
terminal box.
Activity:
Maintenance work, start-up.
Possible
Serious injury or death.
consequences:
Preventative
Trained electricians may only carry out all
measures:
work on the electrical equipment.
If work is necessary on parts, which conduct
dangerous voltage, a second person should
be called in who can break the power supply
in case of emergency.
The yellow-marked lines conduct voltage
even when the machine is switched off (main
switch to 0).
Only use original safety fuses with stipulated
intensity of current.
Faulty electrical components must be
replaced immediately.
If faults occur in the electrical energy supply,
switch machine off immediately.
The terminal box must be locked during
operation. Before opening the terminal box:
Main switch to 0.
Type of danger:
Danger caused by failure of the Emergency
Stop function.
Activity:
All activities.
Possible
Serious injury or death.
consequences:
Preventative
It must be guaranteed that failure of an
measures:
Emergency Stop button is displayed and
leads to an immediate stop of the machine.
Page 19

Advertisement

Table of Contents
loading

This manual is also suitable for:

H 80/120H 80/160H 80/200

Table of Contents