Structural Changes, Spare Parts, Accessories; Operation Manuals From Other Manufacturers - Virtus H 80 Series Operating Manual

PART A: Basic machine
Granulator
H 80 Series
4.4

Structural changes, spare parts, accessories

4.5

Operation manuals from other manufacturers

 VIRTUS 2023, All rights reserved
For reasons of safety, remodelling and modifications to the
machine, in particular to the electrical devices, are only
permissible by arrangement with the manufacturer!
Replace faulty parts immediately. Only use original spare parts or
spare parts from other manufacturers, which correspond, to the
original spare parts with regards to function, stress and safety.
This applies in particular for reasons of EMC (electro-magnetic
compatibility) for electrical components.
The use of unsuitable parts can impair resistance to rays and
increase the emission of rays!
If parts are replaced which are relevant for safety, they must be
checked afterwards for proper functioning.
Only use accessories, which have been approved by the
manufacturer. Use of accessories can change work with the
machine. You must therefore observe the additional advice for
your work and your safety. Read Part B: Accessories, before you
commission the machine.
Integrated in the machine are systems from other manufacturers.
When working on or with these systems, please observe the
advice in the operation manuals from the respective manufacturer.
These operation manuals are enclosed with the machine
documentation.
Page 15