PART A: Basic machine
Granulator
H 80 Series
5.6
Discharge of grinding material
Illustration:
Pipe connection for
blower
Illustration:
By-pass flap
VIRTUS 2023, All rights reserved
The ground material is sucked off by means of a blower out of the
suction trough of the granulator. During this process, air is sucked
through the in feed hopper of the granulator and drawn through
the grinding chamber. At the same time, the grinding chamber and
the grinding material are cooled. In addition, a partial air current is
sucked in through the by-pass flap which is located on the suction
trough. This air current can be regulated with the help of an air
regulating flap mounted here.
If a material blower is installed in your plant configuration, please
observe the additional information for work with and on the
material blower in Part B: Accessories.
Page 39