Table of Contents
Advertisement
___
s_ a_ f_ e_ t-=-
y_b _ e_ lt_ s ______________________________________________
_
Adjusting
safety
belt height
Use the safety belt height adjustment to change belt posi-
tion on the shoulder.
Fig. 229 Adjusting
shoulder belt height
The safety belt height adjustors for the front seats can be
used to adjust the height of the shoulder portion of the
safety belt so that it is positioned correctly.
-
Push the latch ~ fig. 229 up or down so that the shoulder
portion of the safety belt is positioned
nearly midway
over the shoulder ~ &
in "Safety belt position"
on
page 214.
&
WARNING
Always read and heed all WARNINGS and other important informa-
tion
~
page 212. •
Improperly
worn
safety
belts
Incorrectly positioned safety belts can cause severe inju-
ries.
Wearing safety belts improperly can cause serious injury or
death. Safety belts can only work when they are correctly
positioned
on the body. Improper seating positions reduce
the effectiveness of safety belts and will even increase the
risk of injury and death by moving the safety belt to critical
areas of the body. Improper seating positions also increase
the risk of serious injury and death when an airbag deploys
and strikes an occupant who is not in the correct seating
position. A driver is responsible for the safety of all vehicle
occupants and especially for children. Therefore :
-
Never permit anyone to assume an incorrect sitting posi-
tion in the vehicle while traveling ~ & .
&
WARNING
Improperly worn safety belts increase the risk of serious personal
injury and death whenever a vehicle is being used.
•
Always make sure that all vehicle occupants are correctly
restrained and stay in a correct seating position whenever the
vehicle is being used.
•
Always read and heed all WARNINGS and other important infor-
mation
~
page 212. •
Safety
belt pretensioners
How
safety
belt pretensioners
work
In front, side and rear-end collisions above a particular
severity, safety belts are tensioned automatically.
The safety belts are equipped with safety belt pretensioners . The
system is activated by sensors in front, side and rea r-end collisions
of great severity . This tightens the belt and t akes up belt slack ~
&
in "Service and disposal of safety belt pretensioner" on page 217.
Taking up the slack helps to reduce forward occupan t movement
during a collision.
•
Advertisement
Table of Contents
