Table of Contents
Advertisement
___________________________________________
A _ d _v _ a_ n _c _e _ d_ P_ a _r _ k _i_ n--= g =-- S _y = --- s_ t _ e _ m _ ___._
The volume and frequency settings are automatically
stored and
assigned to the remote master key.
&
WARNING
Always make sure that the volume and frequency of the chimes is
adjusted so that you can easily hear the acoustic distance signal
even if the radio is playing, the air-conditioner blower is on High or
there is a high level of outside noise. Check the settings whenever
someone else has driven the vehicle before you. •
Applies to vehic les: with Advanced Parking System with rea r view camera
Adjusting
the chimes
- option
2
The menu for adjusting signal sounds can also be called
up via the control button with the "settings" function.
Controls and equip-
ment
Fig. 206 MMI Display:
Rear-view camera
picture
Fig. 207 MMI Display:
Audi parking system
- Activate the Audi parking system ~ page
770.
The rear-
view camera picture appears in the MMI Display.
-
Select Settings ~ fig. 206. The menu for adjusting Front
volume , Front frequency , Rear volume and Rear
frequency appears in the MMI Display => fig. 207.
Select Front volume to change the volume of the front
audible signal generator, or Rear volume to change the
volume of the rear audible signal generator.
-
Select Front frequency to change the frequency of the
front audible signal generator or Rear frequency if you
want to change the frequency of the rear audible signal
generator.
-
Select Settings ~ fig. 207, or
-
Press the [ RETURN
I
button. The rear-view camera picture
appears in the MMI Display again.
When adjusting the volume and frequency, the new setting will
sound for about 2 seconds from each audible signal generator. The
volume and frequency settings are automatically
stored and
assigned to the master key with remote control.
~
Vehicle care
I
I
irechnical data
Advertisement
Table of Contents
