Table of Contents
Advertisement
___
H _o_ m _ e _L _i _ n _k _® __________________________________________________
_
Prog ram min g th e bump e r m o unt e d tr a nsmitt e r
1. Hold t he original remote control at a distance between
0-
5 in . (0- 13 cm) from the bumper below t he appropriate
headlight for your vehic le (use the shortest distance
poss ible) .
2. Aim the remote control just below the driver side head -
light.
3. Press and hold the activation button on the remote
control.
4. The emergency f lashers will flash three tim es (after
about 15-60 seconds) when the programming
is
successful. Now release the button on the remote
control.
-
If the dev ice utilizes a rollin g code, please follow phase 3
of ~ page 191, "P rogramming the Home li nk® trans -
mitter" for ro ll ing code programming .
This procedure wi ll cause t he existin g programm ing on t he
Homelin k® butt on to be erased ! •
Ap plies to v ehi cl es: wit h Hom eli nk® u niversal rem ote con tro l
Erasing
the programming
of the Homelink
®
transmitter
When you erase the programming,
the programming
on
all three of the transmitter channels with be lost!
-
Perform steps 1 to 4 as described on ~ page 192, "Phase
1: programming
the overhead keypad".
When comp leted, the Homelink ® system will be in the program -
m ing mode and is t hen ready to learn the codes for remote
controlled devices.
[ i ]
Tips
•
Programmed buttons cannot be erased ind ividua lly.
•
For security reasons you are advised to erase the programming
of the Homelink ® system before you sel l your vehic le. •
Ap plies to v ehicle s: w it h Hom elink® universa l rem ote co nt ro l
Information
and accessories
If you wou ld like more information
on Homelink ®, where to
purchase the Homelink® compatib le products, or would like to
purchase the Homelink ® Home Lighting Package, please cal l toll -
free: 1-800-355 -3515.
[ i ]
Tips
•
The Homelink ® universal transmitter
compl ies with part 15 of
the FCC ru les and RSS-210 of IC part 15. Operation is subject to the
f ollowing cond it ions :
- this device may not cause harmful interference, and
- this device must accept any interference that may be received
including interference that may cause undesired operation .
•
Changes or mod ificat ions not express ly approved by the party
responsible for compliance cou ld void the user's authority to
operate the device (DOC: ISTC 1763 102 264 Prince MODEL/FCC ID:
CB2 V94800l. •
Advertisement
Table of Contents
