Operation Order - Energetics CT 210 Assembly Manual

OPERATION ORDER

Drawing A
Drawing B
Drawing C
Drawing D

Installs 2 pieces of 1.5V #3 batteries, then the screen will display as
following "Drawing A" and have "Beep" sound at the same time.

The calendar display will be in blinking mode shown as "Drawing B",
then you can press SET button to set up the value. You can also press
RESET button to come back the preset value. Press "MODE" button
will skip to Month, Date, Hour, and Minute. Set-up method is the same
with year. Press "MODE" button to confirm set-up shown as below
"Drawing C".

Get access to the set-up mode of TIME/DISTANCE/CALORIES. When
you are in each set-up mode. For instance the time set-up, when the
time value is blinking, you can press "SET" button to adjust the number.
Press "Mode" button for confirmation and skip to next set-up. The set-
up of DISTANCE & CALORIES is the same as TIME set-up.

When you are in PULSE mode, you may press SET button to set target.
After setting, press "MODE" button to confirm and skip to TIME screen.
Continuously press "MODE" button will act this circle. If you do not
enter the RPM and PULSE signal or manual set-up time over 4 minutes
in this mode, it will be skip to SLEEP mode shown as "Drawing D".
16