Connecting The Control Cables - ABB ACS480 Hardware Manual
Hide thumbs
Also See for ACS480:
- Hardware manual (180 pages) ,
- Troubleshooting manual (24 pages) ,
- Quick installation and start-up manual (2 pages)
Table of Contents
Advertisement
62 Electrical installation
Connecting the control cables
Before you connect the control cables, make sure that all option modules are
installed. Refer to
Option modules
Refer to
Default I/O connection diagram (ABB standard macro)
default I/O connections of the ABB standard macro. For other macros and
information, refer to ACS480 Firmware manual (3AXD50000047399 [English]).
Connect the cables as shown in
WARNING! Obey the
or death, or damage to the equipment can occur.
Before you start the work, do the steps in
page 13.
on page 69.
Control cable connection procedure
Safety instructions
on page 11. If you ignore them, injury
Precautions before electrical work
on page
63
for the
on page 67.
on
Advertisement
Table of Contents
