Advertisement
Connecting
a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the DVD player/satellite receiver or
TM. You can also record one TV channel while watching another
channel.
Note: If your DVD player has component video connections, follow
the connection instructions under "Connecting a DVD player with
ColorStream
TM
(component video) and a VCR" on page 10.
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two single audio cables
for a mono VCR)
• two regular video cables
• one S-video cable
To Satellite
DVD / Satellite
Receiver
TV
Note:
Youcan use a regular video cable insteadof
an S-video cable between the TVand DVD
player/satellite receiver,but the picture quality
will decrease.
Theillustration at left shows one S-video
cable and onepair of audio cables connected
from the DVD player/satellite receiver to
Video-1 on the T_
Do not connect a regular video cable and an
S-video cable to Video-1 (or Video-2) at the
same time. Doing so will distort the picture.
When recording, set Audio Out to FIX
Csee "Selecting
variable audio OUT"
on page 33). With Audio Out set to
FIX, the TV's volume setting during
recording will not affect the sound
level being recorded.
9
27/32/36AF4
] (El
Advertisement
