Advertisement
To unblock all blocked channels:
Note: This will unblock every channel you have blocked. YOU cannot
unblock individual channels.
1. Press MENU.
2. Press 4 or _ to highlight the SET UP menu.
3. Press I or T to highlight V-CHIP CONTROL.
4. Press 4 or _ to display the Enter PIN Code screen.
5. Use the CHANNEL
NUMBERS
(0-9) to enter your four-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press I or T to highlight BLOCK CHANNEL.
7. Press 4 or _ to display the BLOCK CHANNEL
menu.
SETICLEAR
will be highlighted.
8. Press 4 or _ to highlight CLEAR.
9. Press T to clea ,'illblo&ed channels from the list.
10. Press EXI'I:
RECALL
Q
®
®
®
®
MUTE
®
®
®
®
POWER
@
®
--
CHANNEL
NUMBERS
--
MENU
--
EXIT
Locking video inputs
YOU can use the Video Lock _ature to block the input sources
(Video 1, Video 2, Video 3, and ColorStre,_m) and ch_nels
3 and 4.
Note: 'Itle Video Lock J:cature is independent
of the Enable Blocking
option of V-Chip control (p_e 21).
The Video Lock options are:
Video:
Blocks Video 1, Video 2, Video 3, and ColorStream.
Video+: Blocks Video 1, Video 2, Video 3, ColorStrcam, and
channds 3 and 4.
Off"
Disables the Video Lo& _ature.
To set up video lock:
1. Press MENU.
2. Press 4 or _ to highlight the SET UP menu.
3. Press I or I' to highlight V-CHIP CONTROL.
4. Press 4 or _ to display the Enter PIN Code screen.
5. Use the CHANNEL
NUMBERS
(0-9) to enter your four-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press I or I' to highlight VIDEO LOCK.
7. Press 4 or _ to select either VIDEO, VIDEO+,
or OFE
®@@
SET UP
@©
Note:
In nofmat 7-Vviewing, if you canno_access" g 'le
input sources ._ideo I, Video2, Video3, and
CotofSZfeam)or channels 3 and 4, check #le
VideoLock seZJngand high/ighZOFFif
necessary
IIII I1111 l[llll [_11
Dlllllll_l I DlllI_IB ill 1 _ I
25
2//32/36AF41 [E)
Advertisement
