Advertisement
Adding and erasing channels
manually
After you have automatically programmed the channels into the TV's
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV's memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press • or _, to highlight the SET UP menu.
4. Press • or • to highlight ADD/ERASE.
SET UP
LANGUAGE:
[ENGLISH]
FRANCAIS
ESPANOL
TV/CABLE:
[TV]
CABLE
CH
PROGRAM
HOVE[vA]
SELECT
[<
b]
5. Press • or _ to highlight ADD or ERASE, whichever function
you want to perform.
6. Press MENU.
7. Repeat steps 1-6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press CHANNEL ••.
To change to a specific channel (programmed
or unprogrammed):
Press the
CHANNEL NUMBERS
(0-9 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100,2, 5).
Image tilt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by terrestrial magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press
MENU,
and then press • or _ until the SET UP menu
appears.
2. Press • or • to highlight IMAGE TILT.
3. Press • or _ to adjust the picture tilt (from-10
to +10).
SET UP
_MORE
DEMO
[START]
STOP
If
F'(¢l=llllll
TV Front Panel
Channel
VA
DEMO
MENU
TVNDEO
VOLUME
CHAMMEL
- --
< --
l,--v--&
POWE_
I
I
I
Menu
<1 •
YA
RECALL
MUTE
@ ®
POWER
--
CHANNEL
NUMBERS
MENU
:HANNEL
AY
--
EXIT
MOVE[_]
SELECT[<
b]
27/32/36AF41
[E)
1 8
Advertisement
