Advertisement
Connecting
a cable converter box
This connection allows you to watch basic and premium cable
channels. To view premium channels, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
• one coaxial cable
Note:
Whenyou use a converter box withyour TV,
the remote control may not operate certain
features,such as channel• IV, channel
block, favorite channels,or channel labels.
Connecting
a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to Video 1 (see "Selecting the signal source" on page 17). Tune the
VCR to channel 3 or 4 (the same channel as the converter box output
switch), and use the cable converter box to change channels.
You will need:
• one coaxial cable
• one pair of audio cables (one single audio cable for a mono
VCR)
• one video cable
TV
StemoVCR
From Cable
Note:
Whenyou use a converterbox with your
T_, the remote control may not operate
certain features, such as channel • V,
channel block, favoritechannels,or
channel labels.
ff you havea mono VCR, connect
L/Mono to VCRAudio OUTusing only
one audio cable.
ff you havean S-VHS VCR,use an
S-video cable instead of a regular video
cable.
Do not connect a regular video cable
and an S-video cable to Video-1 (or
Video-2) at the same time.
27/32/36AF41
[E)
8
Advertisement
