Atomiser Set And Replacement Parts - Beurer IH 24 Kids Instructions For Use Manual

Important
Do not boil or autoclave the compressed air hose.
• Put the parts together again when they are
completely dry and place them in a dry, sealed
container.
Notice
Ensure that the parts are completely dried after
cleaning, otherwise the risk of bacterial growth is
increased.
Drying
• Place the individual parts on a clean, dry and
absorbent surface and leave them to dry com-
pletely (at least 4 hours).
Durability of materials
• As with any plastic parts, atomisers and the
rest of the atomiser set are affected by a cer-
tain amount of wear and tear when used and
hygienically prepared on a frequent basis. Over
time, this can lead to a change in the aerosol,
which can have a negative effect on the effi-
ciency of the treatment. We therefore advise
you to replace the atomiser and the atomiser
set no later than one year if the parts are not
disinfected more than 360 times a year. Fre-
quent disinfection shortens the service life of
the parts.
• The following point should be observed when
selecting the cleaning product or disinfectant:
Only use a mild cleaning product or disinfect-
ant in the concentration and volume prescribed
by the manufacturer.
Storage
• Do not store in damp conditions (such as in a
bathroom) and do not transport with any damp
items.
• When storing and transporting, protect from
prolonged direct sunlight.
• • The atomiser set parts can be safely stored
in the storage bag. Store the device in a dry
place, ideally in the original packaging.
10. ATOMISER SET AND RE-
PLACEMENT PARTS
The atomiser set parts and replacement parts are
available from the corresponding service address
(according to the service address list). Please state
the corresponding order number.
Designation
Atomiser set = IH 24
Kids/26 Kids year pack
(contains mouthpiece,
silicone children's mask,
silicone baby mask,
atomiser,
compressed air hose,
filter, angled fitting)
Atomiser set = Standard IH
26 year pack
(contains mouthpiece,
nosepiece,
silicone adult mask,
silicone children's mask,
atomiser,
compressed air hose,
filter)
Nosepiece
Notice
If the device is not used according to the specifica-
tions, perfect functionality cannot be guaranteed!
We reserve the right to make technical changes to
improve and develop the product. This device and
its atomiser set conform with the European stand-
ard EN 60601-1-2 (Group 1, class B, in accordance
with CISPR 11, IEC 61000-3-2, IEC 61000-3-3,
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-7,
IEC 61000-4-8, IEC 61000-4-11) and is subject to
particular precautions with regard to electromag-
netic compatibility.
Please note that portable and mobile HF commu-
nication systems may interfere with this device.
For more details, please contact our Customer
Services at the address indicated.
Notes on electromagnetic
compatibility
• The device is suitable for use in all environ-
ments listed in these instructions for use, in-
cluding domestic environments.
• The use of the device may be limited in the
presence of electromagnetic disturbances. As
a result, the device may fail.
• Avoid using this device directly next to other
devices or stacked on top of other devices, as
this could lead to faulty operation. If, however,
it is necessary to use the device in the manner
stated, this device as well as the other devices
24
Material REF
601.19
PP/silicone
Silicone/PP
Silicone/PP
PP/silicone
PVC
PU
601.28
PP/silicone
PP/silicone
PVC/alumi-
nium
PVC/alumi-
nium
PP/silicone
PVC
PU
PP 601.37