Initial Use; Usage - Beurer IH 24 Kids Instructions For Use Manual

Hide thumbs Also See for IH 24 Kids:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
Nasal douche
Cover
17
Collection container
18
for nasal secretion
Saline container
19
Notice
The nebuliser can also be used by adults. Adults
have the option of using a nasal douche and a
separate atomiser set (includes mouthpiece, nose-
piece, adult mask, children's mask, atomiser, com-
pressed air hose, filter) for their nebuliser. Neither
are included in the scope of delivery of the nebu-
liser (n/a). Nevertheless, the appropriate use of the
nasal douche, nosepiece, etc. is described below.
You can find an overview of all replacement items
in section "Atomiser set and replacement parts".

6. INITIAL USE

Setting up the device
Take the device out of the packaging.
Place the device on a flat surface.
Make sure that the vents are free from obstruc-
tions.
Before using the device for the first
time
Notice
• Clean and disinfect the atomiser and atomiser
set before using them for the first time. See
"Cleaning and maintenance" in this regard.
• Connect the compressed air hose
bottom of the medication container
• Connect the other end of the compressed air
hose
to the nebuliser hose connection
7
by turning it slightly.
• Insert the medication container
holder for the atomiser
Mains adapter connector
The device must only be connected to the mains
voltage that is specified on the type plate.
• Insert the mains plug of the mains cable
a suitable socket.
• To connect to the mains, fully insert the plug
into the socket.
Cover hole
20
Nosepiece
21
to the
7
.
11
A 1
A 2
into the
11
8
3
Notice
• Ensure that there is a mains socket close to the
set-up area.
• Arrange the mains cable so that no-one will trip
over it.
• To disconnect the nebuliser from the mains
after inhalation, first switch off the device and
then pull the mains plug out of the socket.

7. USAGE

Important
• For hygiene reasons, it is essential to clean the
atomiser
8
after each treatment and to disinfect them after
the last treatment of the day.
• The atomiser set parts may only be used by
one person; use by several people is not rec-
ommended.
• If the therapy involves inhaling several differ-
ent medications one after the other, please be
aware that the atomiser
der warm tap water following every usage. See
"Cleaning and maintenance" in this regard.
• Please observe the notes on changing the filter
in these instructions for use.
• Check that the hose connectors are firmly at-
tached to the nebuliser
before each use of the device.
• Before use, check that the device is function-
ing correctly. To do this, briefly switch on the
nebuliser (together with the connected atom-
iser, but without medication). If air comes out
of the atomiser
7.1 Inserting the atomiser insert
• Open the atomiser
ticlockwise against the medication container
. Place the atomiser insert
4
11
cation container
• Ensure that the cone for administering medica-
tion fits well on the cone for the air duct inside
the atomiser
• Insert the medication container
holder for the atomiser
7.2 Filling the atomiser
into
• Fill with an isotonic saline solution or pour the
medication directly into the medication con-
tainer
. Avoid overfilling. The maximum rec-
1
ommended filling quantity is 8 ml.
20
and the rest of the atomiser set
must be rinsed un-
8
and the atomiser
4
, the device is working.
8
by twisting the top an-
8
in the medi-
9
.
11
.
8
11
.
6
8
into the

Advertisement

Table of Contents
loading

Table of Contents