Parameters/Commissioning Sheet; Main Parameters After Commissioning; Track Changes - Swegon ESENSA PX TOP Operation & Maintenance Instructions Manual

7. Parameters/Commissioning Sheet

Please enter all settings specific to your installation in this table. Please keep this document at hand when
there is a need to contact us to report a problem.

7.1 Main Parameters after Commissioning

1 ESENSA model:
O Constant Airflow
2 Operating mode:
O Demand control
3 Constant Airflow:
4 Constant Torque:
Vmin =
Vmax =
5 Demand control: m³h / %TQ Vmin =
m³h / %TQ Vmax =
% on K3 =
Assignment Pa =
6 Constant pressure:
% on K3 =
7 Ratio exhaust / supply:
Activated?
Pressure alarm
Setup Initialisation:
8 (not for pressure
control mode)
Supply:
Exhaust:
9 If KWin option: T° KWin =
10 If KWout option T° KWout =
11 If IBA option: T° IBA =
12 T° IBA =
Antifrost protection:
34 www.swegon.com
GB.ESENSA.MO.231025
O Constant Torque
O Constant pressure
K1 = O [m³/h] O [l/s]
K2 = O [m³/h] O [l/s]
K3 = O [m³/h] O [l/s]
K1 = % Torque
K2 = % Torque
K3 = % Torque
V
V
O [m³/h] O [l/s]
O [m³/h] O [l/s]
%
O [V] O [Pa]
%
%
O Yes O No
O Automatic O Manual
O [m³/h] O [l/s] O [Pa]
O [m³/h] O [l/s] O [Pa]
°C
°C
°C
°C
We reserve the right to alter specifications.

7.2 Track Changes

Enter details when the Setting of a parameter has been changed (use only one row per parameter):
Setting before Setting of
Parameter Name
change change #1
We reserve the right to alter specifications.
GB.ESENSA.MO.231025
Date of Setting of Date of
change #1 change #2 change #2
www.swegon.com 35