Parameters/Commissioning Sheet - Swegon GLOBAL PX Operation And Maintenance Instructions

9.0 Parameters/Commissioning Sheet

Please enter all settings specific to your installation in this table. Please keep this document at hand when
there is a need to contact us to report a problem.
9.1 MAIN PARAMETERS AFTER COMMISSIONING
1 GLOBAL model:
2 Operating mode:
3 Constant Airflow:
4 Constant Torque:
Demand control:
5
6 Constant pressure:
Ratio exhaust / supply:
7
Pressure alarm
8
(not for pressure
control mode)
9 If KWin option:
If KWout option
10
11 If IBA option:
56
O Constant Airflow
O Demand control
K1 =
K2 =
K3 =
K1 =
K2 =
K3 =
Vmin =
Vmax =
m³h / %TQ Vmin =
m³h / %TQ Vmax =
% on K3 =
Assignment Pa =
% on K3 =
Activated?
Setup Initialisation:
Supply:
Exhaust:
T° KWin =
T° KWout =
T° IBA =
O Constant Torque
O Constant pressure
O [m³/h] O [l/s]
O [m³/h] O [l/s]
O [m³/h] O [l/s]
% Torque
% Torque
% Torque
V
V
O [m³/h] O [l/s]
O [m³/h] O [l/s]
%
O [V]
%
%
O Yes
O Automatic
O [m³/h] O [l/s] O [Pa]
O [m³/h] O [l/s] O [Pa]
°C
°C
°C
Operation and maintenance instructions – v2.8.8 & 2.7.3
O [Pa]
O No
O Manual