Service Menu Contents - Panasonic DVCPRO AJ-D455P Service Manual

13-3. Service Menu Contents

A00: SERVO ADJUST
Item
SUPER
No. No.
DISP.
A01 FG DC ADJ
A02 RL GAIN ADJ
100
255
100
255
A03 T TORQUE -128
127
A04 S TORQUE -128
127
A05 PG SHIFT 25
1649
4095
1645
4095
Set value
SUPER
DISP.
0 OFF Automatic adjustment of the DC offset of the capstan, S/T-Reel FG.
This shall be done is in EJECT condition.
1
Operation:
2 OK
1. The following operation will start when the
3 CAP NG
1) S/T-brake OFF
4 SRL NG
2) Capstan, S/T-Reel is rotation
5 TRL NG
3) DC offset automatic adjustment will start
2. When the message "OK" appears, adjustment is completed.
3. Release the
If the following messages are displayed, the adjustment is faulty.
CAP-NG
SRL-NG
TRL-NG
T REEL
Automatic adjustment of the reel torque of the S/T-Reel.
Operation:
0 0
This shall be done is in EJECT condition.
| |
1. Switch to PLAY mode.
100
2. Keep pressing the
| |
The set value indication will go out and automatic adjustment will start.
255
3. When the set value is displayed, adjustment is completed.
S REEL
Release the
0 0
| |
100
| |
255
-128
Compensation of the T-reel driver offset value
| |
This shall be done in EJECT condition.
0 0
Operation:
| |
1. The following operations will start when the
127
1) T-brake OFF
2) Cylinder rotation
3) Loading to the loading completion position
2. Set the value with the search dial.
3. Release the
1) Unloading to the unloading completion position
2) Cylinder stop
3) T-brake ON
-128
Compensation of the S-reel driver offset value
| |
This shall be done in EJECT condition.
0 0
Operation:
| |
1. The following operations will start when the
127
1) S-brake OFF
2) Cylinder rotation
3) Loading to the loading completion position
2. Set the value with the search dial.
3. Release the
1) Unloading to the unloading completion position
2) Cylinder stop
3) S-brake ON
RISE
Alignment tape is used for PG mono-multi automatic adjustment.
0 0
Operation:
| |
1. Switch to PLAY mode.
1649
2. Keep pressing the
| |
The set value indication will go out and automatic adjustment will start.
4095
3. When the set value is displayed, adjustment is completed.
FALL
Release the
0 0
| |
1645
| |
4095
Setting contents and
outline function explanation
or
or button
Capstan FG adjustment NG
S-Reel FG adjustment NG
T-Reel FG adjustment NG
or button.
or button.
or
or button when setting is completed.
or
or button when setting is completed.
or button.
or button.
INF-29
BACK
-UP
Yes
button is pressed.
Yes
Yes
button is pressed.
Yes
button is pressed.
Yes
Remarks