Table of Contents
Advertisement
Before Requesting Service
Power
Monitor
No picture or sound...
Poor picture with normal sound...
Poor sound with normal picture...
Poor TV reception...
No color or poor color...
Ghost (multiple) images...
Rainbow effect appears on the Combination
VCR picture...
TV programs cannot be watched...
TV program cannot be recorded...
Timer recording cannot be performed...
No playback picture, or the playback picture is
noisy or contains streaks...
VCR cannot be controlled...
24
Correction
e Completely insert the Power Plug into an AC wall outlet.
e Set the POWER button to ON.
Correction
e Make sure your antenna or cable system is connected to the
Combination VCR.
(P. 5)
e Check that the power plug is completely plugged into an AC
outlet.
e Check that the POWER
button is set to on.
e Adjust the BRIGHT, SHARPNESS, and PICTURE controls in
the SET UP TV menu.
(P. 12)
e Adjust the VOLUME control. (P. 11)
* Adjust the SHARPNESS and PICTURE controls in the SET
UP TV menu.
(P 12)
e Adjust the TINT and COLOR controls in the SET UP TV
menu. (P. 12)
s Install a directional antenna.
e The Combination VCR swiveled while it was operating.
Unplug the Combination VCR, swivel it into place, wait one
hour, and then plug it back in.
e Make sure that the channel being received is in the
Combination VCR's memory.
(P. 8)
Correction
s Make sure your antenna or cable system is connected to the
Combination VCR.
(P. 5)
* Make sure that the record tab is intact on the cassette.
(P. 23)
¢ Set the recording Start/Stop time correctly. (P. 20-21)
* Timer recording may not be performed or continued if a
power interruption of more than 1 minute occurs before or
during a Timer Recording, even if power resumes thereafter.
e Adjust the TRACKING control in either direction. (P. 16)
e Make sure that VCR LOCK is set to off. (P. 22)
Advertisement
Table of Contents
