Panasonic DVCPRO AJ-D455P Service Manual page 166

H00: OTHER ADJUST
Item
SUPER
No. No.
DISP.
H01 STILL LIMIT
H02 LTC OUT SEL
H03 SYSTEM TYPE
H02: TC output by the mode at the time of LTC OUT SEL = STOP setting
TC
INT/EXT
EJECT
STOP
STANDBY OFF
INT
JOG/VAR/SHTL STILL
Others
EJECT
STOP
STANDBY OFF
EXT
JOG/VAR/SHTL STILL
Others
13-4. SET-UP Menu Initialization
1. In the EJECT mode, press the "MENU" button to open the SETUP menu.
2. Keep and press the "EJECT" button, and press the "RESET" button mor than 2 seconds.
3. Close the menu automaticaly, then the SET-UP menu information (SYSTEM, USER1-5) is initialized.
Set value
SUPER
DISP.
0 2 min
Set the maximum value of the "SETUP-MENU 400 : STILL TIMER".
1 6 min
Decide whether the still timer should be reset when the
STANDBY-ON command is received during the STOP mode.
0:2 min/The still timer should not be reset
1:6 min/The still timer should be reset
0 N-STOP
Selection of TC output according to the mode or not
1 STOP
0: Output always, independent of the mode
1: ON/OFF switching of the TC output according to the VTR mode.
However, the TC output always is ON at the time of SETUP
MENU 317: AUD MEM MODE = AMU_X, AMU_VO.
0 TYPE 1
Selection whether 2.3x speed is added to SHTL mode or not
1 TYPE 2
0: No 2.3 speed
1: 2.3 speed exists
Mode
—
(including BLACK, GLAY of EJECT)
Setting contents and
outline function explanation
VV / EE
— OFF
VV
EE O
—
INF-41
BACK
Remarks
-UP
Yes
Yes
Yes
TC output
ON
OFF
N
ON