Internal Switch Setting Method; Internal Led Indication - Panasonic DVCPRO AJ-D455P Service Manual

11. Internal Switch Setting Method

The switches setting on each circuit board are shown below.
The switches "Factory use only" must be set to the "factory setting".
BOARD
F1: AUDIO SW4100
SW4101
F6: SYSCON SW301
F1: AUDIO circuit board

12. Internal LED Indication

BOARD Ref. No.
F3A: SDI D3200
(AJ-YA455P)
F7: SERVO D350
D351
D352
F3A: SDI ( AJ-YA455P) circuit board
FACTORY
Ref. No. SW
SETTING
- HIGH
- HIGH
1 OFF
2 OFF
SW101
For SDI input detection (light with SDI input/not light with no input)
Capstan servo lock: Light with lock/not light with unlock
Cylinder servo lock: Light with lock/not light with unlock
For servo microcomputer operation confirmation (flashing with a operating)
D3200
Aud io input inpedance setting (600 / HIGH)
Audio input inpedance setting (600 / HIGH)
Factory use only
Factory use only
F6: SYSCON circuit board
SW301
SW100
FEATURE
F7: SERVO circuit board
INF-26
FEATURE
D352 D350
D351