Panasonic DVCPRO AJ-D455P Service Manual page 19

3. Disconnect 2 connectors (A) at Front Loading
motor Board and the Interconnection Board.
Front Loading Motor Part
Connectors (A)
4. Push and rotate the red plastic gear in front of the
Front loading motor counterclockwise until the
screw (A) which is used to fix the Front Loading
Unit can be seen.
Interconnection Board
Rotate the Gear
5. Unscrew the 4 screws (A) and (B), then remove the
Front Loading Unit.
1-5. Removal of Mechanism Unit
1. Remove the Front Loading Unit.
(Refer to item 1-4.)
2. Disconnect 3 connectors (P4001, P5002, P5003)
which are connect to RF CUE Board.
3. Unscrew the 3 screws (A) and remove the
Mechanism Unit.
P5002 RF CUE Board
(a)
Notes:
1. When remove the Mechanism Unit, the connector
(a) which is connected to the Mother Board and
Mechanism Unit is disconnected.
2. Check the connector has been connected securely.
DIS-2
Screws (B)
Screws (A)
P5003
Screws (A)
P4001