Panasonic DVCPRO AJ-D455P Service Manual page 364

Item Set value
SUPER
No. No.
DISP.
A06 T PHOTO
A07 S PHOTO
A08 TENSION 0
1
A09 X VALUE 25 -128
|
0
|
127
A10 PB GAIN 25
-128
|
0
A11 PB LIN 25 0
1
A12 RP GAIN 25
-128
|
0
A13 RP LIN 25 0
1
A14 RP GAIN DV
-128
|
0
A15 RP LIN DV 0
1
A16 TRK VAL 25 -128
|
0
|
127
A17 REC DATA SEL 0
1
SUPER
outline function explanation
DISP.
Voltage
Indication of the detection voltage of the photo sensor for beginning and end
value
detection on the T-side
This is used for adjustment of the sensitivity of the photosensor.
0.0V
Operation
|
1. Switch to EJECT mode.
3.3V
2. Select the item.
3. The voltage value will be displayed.
4. Insert the cassette for sensitivity adjustment.
Stop will be performed at the cassette DOWN position.
5. Adjust the sensitivity with the VR on the MECHA_IF.
6. The cassette will be ejected when the cursor is moved to an item other
than A05: T PHOTO or A06: S PHOTO.
Voltage
Indication of the detection voltage of the photo sensor for beginning and end
value
detection on the S-side
This is used for adjustment of the sensitivity of the photosensor.
0.0V
Operation:
|
1. Switch to EJECT mode.
3.3V
2. Select the item.
3. The voltage value will be displayed.
4. Insert a cassette for sensitivity adjustment.
The cassette will stop at the DOWN position.
5. Adjust the sensitivity with the VR on the MECHA_IF.
6. The cassette will be ejected when the cursor is moved to an item other
than A05: T PHOTO or A06: S PHOTO.
Non-
Loading operation for tension offset adjustment
display
Operation:
ON
1. Switch to EJECT mode.
2. Switch the set value to ON.
Loading will be performed to the loading completion position.
3. Unloading will be performed when the set value is switched to OFF or
when the cursor is moved to another item.
-128
Electrical fine adjustment of the X-value
|
Operation:
0
1. Switch to PLAY mode.
|
2. Keep pressing the
127
The set value display will go out and automatic adjustment will start.
3. Adjustment is completed when the set value is displayed.
Release the and
Adjustment of the ATF prefilter gain of the PB head
-128
|
0
Non-
Adjustment of the LISTA linearity of the PB head
display
ON
Adjustment of the ATF prefilter gain of the PBR head
-128
|
0
Non-
Adjustment of the LISTA linearity of the RP head
display
ON
Adjustment of the ATF prefilter gain of the RP head
-128
(For DV, this can work only when a DV cassette is inserted.)
|
0
Non-
Adjustment of the LISTA linearity of the RP head
display
(For DV, this can work only when a DV cassette is inserted.)
ON
-128
Set the CTL tracking offset value.
|
0
|
127
NORMAL Select the Rec data
CW 0: NORMAL DATA
1: CW signal
Setting contents and
and button.
button.
INF-30
BACK
Remarks
-UP
No
No
No
Yes
Yes
No
Yes
No
Yes
No
No
No