Panasonic DVCPRO AJ-D455P Service Manual page 142

Digital video cassette recorder/ component serial interface board/ digital video interface board/ cassette adapter

Hide thumbs Also See for DVCPRO AJ-D455P:

Table of Contents

C. Boot up the Ver. up Software and Ver. up Procedure

1. Boot up the "MAX+plus II 9.6 programmer only" Software.

2. On main window, select tab "MAX+plus II" and then "Programmer".

3. On main window (Programmer window is displayed), select tab "Option" and then "Hardware

4. On Hardware Setup dialog, set the "Hardware Type" to "yte Blaster (MV) ".

5. On main window, select tab "File", "Project" and then "Name".

6. On dialog of Project Name, select the "tdf format file" or "pof format file" and then perss "OK"

Chapters

Table of Contents