Hillco WTR410 Operator's Manual / Parts Book page 7

1. Review the Operator's Manual and all safety items before servicing or maintaining the Wrap Twine
Remover.
2. Stop the engine, wait for any moving parts to stop, block the tires, and the cylinder areas before
servicing, repairing, adjusting, or maintaining the Wrap Twine Remover system.
3. Place Selector switch to middle position and set hydraulics to float (if possible)to relieve system
pressure.
4. Hydraulic oil is under pressure. Use caution when dealing with the hydraulic system.
5. Keep hands, feet clothing and hair away from all moving and/or rotating parts.
6. Clear the area of bystanders, especially children, when carrying out any maintenance, repairs or
making any adjustments.
HIGHWAY OPERATION AND TRANSPORT SAFETY
1. Check with local authorities regarding transport on public roads. Obey all applicable regulations
and laws.
2. Check clearance elevations and widths of implement for travel near power lines, bridges, trees,
etc.
3. Always travel at a safe speed. Use caution when making corners or meeting traffic.
4. WTR is not designed to transport bales long distances on public roads.
D-211027DMC01
SERVICING AND MAINTENANCE SAFETY
READ OPERATOR'S MANUAL SYMBOL
Decals, which display the ―Read Operator's Manual
symbol, are intended to direct the operator to the
Operator's Manual for further information regarding
maintenance, adjustments and/or procedures for
particular areas of the Wrap Twine Remover. When
a decal displays this symbol refer to the Operator's
Manual for further instructions.
7
November, 2023