Operation - Hillco WTR410 Operator's Manual / Parts Book

Operation:

The WTR has three functions controlled by a switch box in the cab.
Bale Squeeze – Used to squeeze the bale and position the hooks and knife into position to grab and cut the
bale twine/wrap.
Rotate – Used to rotate the squeeze arms out of the way when handling bales that are tightly stacked
Cut – Cycles a series of hooks on the left arm and a knife on the right arm. The hooks grab into the bale and
capture the twine/wrap while the knife simultaneously cuts the twine/wrap.
NOTICE
D-211027DMC01
If WTR power is connected to permanent power, leave
the switch in the center (rotate) position to avoid drain-
ing the battery.
11
November, 2023