Table of Contents
Advertisement
Read this prior to beginning the setup procedure:
Due to the variety of different loader options on the market, the WTR is shipped without service
hoses from the manifold to the loader hydraulics. Secondly, if your tractor does not have
auxiliary hydraulics at the loader then hoses from the rear remotes will need to be routed to the
WTR. It is advisable to have these hoses made prior to beginning the system setup.
Hillco recommends a 3/8 inch service hose with 90° -8 (1/2") SAE Oring Face seal fittings on
one end and the quick coupler option of your choice on the other end.
Step 1:
Unpackaging and Inventory:
Unpack the WTR system, including the boxed items, and compare the items to the inventory list
below. If there are any damaged or missing items contact Hillco Technologies, Inc. at 1-800-
937-2461 for assistance.
Item Description
Center Assembly
Hook Arm Assembly
Knife Arm Assembly
Bale Spears
--Boxed Items --
Hose Support
Operators Manual
3/4-10 x 2-1/2" Bolt, Grade 8
3/4-10 Stover Nut, Grade 8
Switch Box Assembly
Harness, Switch box to Valve
Ram-Mount U-bolt kit
Ram-Mount Double Swivel Arm
5/16-18 x 3-1/2" Bolt, Grade 5
5/16 Ny-lock Nut, Grade 8
* Additional spears are available at the time of order.
You will also need the loader adapter kit chosen at the time of ordering. It may have been
shipped separately.
D-211027DMC01
Setup
Quantity
Weight (Pounds)
1
640
1
200 (WTR510), 175 (WTR410)
1
200 (WTR510), 175 (WTR410)
2*
30
9
4
1
8
8
1
1
1
1
6
6
20
November, 2023
Advertisement
Table of Contents
