User Interface - Honeywell Xtralis FAAST FLEX FLX-010 Product Manual

FAAST FLEX
5

User Interface

There are four buttons located under the cover that are used to configure various operating parameters and
perform additional setup, data logging, and test functions (see Figure 5-1 and Figure 5-2).
Notes: *: Enter the passcode to start the procedure.
l
Underlined: Press and hold the button for 5 seconds to start the procedure.
l
24V/750mA
www.xtralis.com
Figure 5-1: User Buttons (Single Channel)
FAAST FLEX Product Guide
SILENCE / NORMALIZE* / INCREMENT
LOG / CONFIGURATION CHANGE*
RESET* / DISABLE
TEST / PASSWORD CHANGE*
/ DECREMENT
17