Honeywell Xtralis FAAST FLEX FLX-010 Product Manual page 48

FAAST FLEX
6.3.8 Test Mode
In TEST mode, the device will perform a self-test. As tests are executed the user must confirm each step of
the test before it continues.
Follow these steps to enter TEST mode execute the self-test.
Note: If any of these steps do NOT complete correctly, press the SILENCE/+ button to indicate FAIL
condition for the test step. If 30 seconds pass without pressing TEST, the test fails.
Action
Short press the TEST
button. /+
Press the TEST
button to confirm test
PASS or press
Silence to enter test
FAIL.
Press the TEST
button to confirm test
PASS or press
Silence to enter test
FAIL.
Press the TEST
button to confirm test
PASS or press
Silence to enter test
FAIL.
Press the TEST
button to confirm test
PASS or press
Silence to enter test
FAIL.
Press the TEST
button to confirm test
PASS or press
Silence to enter test
FAIL.
Press the TEST
button to confirm test
PASS or press
Silence to enter test
FAIL.
www.xtralis.com
Button
Short
Press
1 3
2 4
Short
Press
1 3
2 4
Short
Press
1 3
2 4
Short
Press
1 3
2 4
Short
Press
1 3
2 4
Short
Press
1 3
2 4
Short
Press
1 3
2 4
Action(s)
5
6
5
6
5
6
5
6
5
6
5
6
5
6
FAAST FLEX Product Guide
Description
All LEDs will show red
in the following
sequence: 1, 3, 5, 6, 4,
2.
All LEDs will show
green in the following
sequence: 1, 3, 5, 6, 4,
2.
Buzzer will sound for 1
second and all LEDs
will show yellow in the
following sequence: 1,
3, 5, 6, 4, 2.
LED 5 shows green,
indicating normal
condition (no
action/alarms or
faults).
LED 2 shows red and
LED 5 shows green to
indicate Action
condition on Channel
1. Relay activation can
be checked.
LED 1 shows red and
LED 5 shows green to
indicate Alarm
condition on Channel
1. Relay activation can
be checked.
LED 5 shows green
and LED 6 shows
yellow to indicate Fault
condition on Channel
1. Relay activation can
be checked.
41