Optional Accessories; Air Shield For Applications In Contaminated Environment (Part No. Dasa1-P); Pc Software Kit (2029-Interface-Kit); Ma Option (Ma420-4) - Honeywell SS4-AS Installation Manual And Operating Manual

SECTION 5

OPTIONAL ACCESSORIES

5.1
5.2
5.3
5.4
5.5
HONEYWELL
Air Shield for Applications in Contaminated Environment
(Part No. DASA1-P)
For installation in areas with high levels of airborne contaminants the Detector Air
Shield should be mounted to the Flame Detector housing. The Airline fitting
accepts ¼" O.D. nylon tubing for an instrument grade air supply of 5 to 15 psi @
6 cubic ft. per minute.

PC Software Kit (2029-INTERFACE-KIT)

PC DOS Software Kit installation facilitates access to FirePic and SnapShot
and provides Detectors operation monitoring capability through the Detector's
RS485 connections. The Kit includes an Interface Box, a PC software diskette,
an RS485 and RS232 cables, and a 120 VAC/12 VDC charger. Optional 220
VAC/12 VDC charger is also available upon request.

4-20 mA Option (MA420-4)

The 4-20 mA module is by Factory Mutual (FM) recognized device to be used
with all approved SS4 type Detectors. Honeywell Analytics is required by FM to
install this device at the factory and certifies this option along with the Detector.
Refer to Section 2.2.5 for system wiring details.
NOTE: Converting Field units of the SS4 Stand-alone relay type to
the 4-20 mA version requires the unit be returned to the factory for
installation and certification.

Detector Mounts (SM2 or SM4)

The heavy duty steel Swivel Mount (SM2) or extra duty Stainless Steel Swivel
Mount (SM4) may be utilized for mounting the SS4 type Detectors. Refer to
Section 2.3 for details.

Test Lamp (FT2045 or FT-2145)

This battery powered, portable, explosion-proof handheld test source for remote
activation of the SS4 type Detectors simulates the radiant energy emitted by an
actual fire in order to test the Detectors operation without the need for an open
flame. The unit is rechargeable with a 120VAC / 12VDC charger. Optional 220
VAC/12 VDC charger is also available upon request.
OPERATOR MANUAL // SECTION 5
OPTIONAL ACCESSORIES
27