Honeywell Xtralis FAAST FLEX FLX-010 Product Manual page 34

FAAST FLEX
6.3.3 Changing Configuration Mode
The device can be configured using two ways:
1. Buttons, dip-switches and LEDs
2. Setting dip-switches 1 and 10 through the Bluetooth app connected to the detector.
Follow these steps to change device configuration:
Action
While the unit is in
WAIT mode, long
press the ENTER
button.
Enter the current
passcode.
Change DIP switch
settings as desired.
Increment current hour
by 30 minuets ( for a
max of +14 hours)
Decrement current
hour by 30 minuets
(for a max of -14
hours).
Press the ENTER
button. The new
configuration is saved
and the device exits
configuration mode.
www.xtralis.com
Button
Long
Press
1 3
2 4
1 3
2 4
1 3
2 4
Short
Press
1 3
2 4
Short
Press
1 3
2 4
Short
Press
LED Display
FAAST FLEX Product Guide
Description
5 LEDs 1-4 will flash
yellow and then go out.
6
After passcode is
entered correctly, all
5 LEDs will show green.
See section 6.3.1
Authenticating -
6
Entering Passcode.
LED 5 will slow blink
5
green.
6
LED 3 blinks green
5
every time user
presses the button.
6
LED 4 blinks green
5
every time user
presses the button.
6
The device will restart
with the new
configuration active.
27