Specifications - Power Module - Dell N01G Installation And Operation Manual

NOTE: You can connect the power cable to the 24V AC/DC, 19 VDC, and a battery simultaneously.
NOTE: The power adapter and sealed lead-acid battery are sold separately.
NOTE: Installing the battery is optional. Dell recommends that you connect a sealed 12V lead-acid battery to the
power module.
NOTE: The 12V lead-acid battery is not sold by Dell.

Specifications - Power Module

Dimensions
Height
Width
Depth
Power requirements
Terminal block connector input voltage/current
Power adapter input voltage/current
Battery connector port
Environmental requirements
Ingress Protection Rating
Temperature range:
Operating (with a maximum temperature gradation of
15°C per hour)
94
117.80 mm (4.64 inches)
216 mm (8.50 inches)
64.20 mm (2.53 inches)
24 VAC (50 Hz–60 Hz) or 24 VDC / 15A
19.5 VDC / 6.67A
12VDC / 15A
IP50
• -30°C to 70°C (-22°F to 158°F) when connected to a 24V
AC/DC power source.
• -30°C to 40°C (-22°F to 104°F) when connected to a
power adapter or battery.