Table of Contents
Advertisement
SECOND FUNCTION
In the DEFAULT confi guration, the
SECOND FUNCTION, the same buttons can be used to call internal receivers 4, 5 and 6.
Press the
button again to disable the function manually.
If the function is not disabled manually, it remains active for approximately 10 seconds.
Porter functions
These functions are only available where there is a porter's desk.
Each function must be correctly set up and confi gured during installation.
Call notification from the porter
If the porter wishes to be called back, the
The LED turns off when communication with the
porter starts.
,
and
buttons are used for calling the respective internal receivers. Using the
LED turns on.
To enable the function, pick up the handset and press
Release the button within 2 seconds.
With the function active, the
button LEDs will fl ash.
Request for call to porter
Press the
button to let the porter know that you want to
be called back.
.
,
,
and
Advertisement
Table of Contents
