Recording Manually; Using Parking Mode - Thinkware F70 PRO User Manual

Using recording features
• Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).
• When incident continuous recording starts, the buzzer sounds as a notification. This function saves you
time when checking the status LED to know the operating status of the product.
• To enable recording, insert a memory card into the product.

3.4 Recording manually

You can record a scene you want to capture while driving and store it as a separate file.
To start manual recording, press the REC button. Then, manual recording will start with the voice guide.
During manual recording, the product operates as follows.
Mode
Manual recording

3.5 Using parking mode

When the product is connected to the vehicle via the hardwiring cable (optional), the operating mode is
switched to parking mode with the voice guide after the engine or electrical accessories are turned off.
• Parking mode operates only when the hardwiring cable is connected. The hardwiring cable (optional)
must be professionally installed to the vehicle by a trained mechanic.
• To use all recording modes, insert a memory card into the product.
• Depending on the battery charging status of the vehicle, the duration of parking mode may differ. If you
want to use parking mode for an extended period, check the battery level to prevent battery depletion.
If you do not want to use parking mode or you want to change the mode settings, from the PC Viewer, click
Settings Dashcam Setting
>
During parking recording, the product operates as follows.
Option
No motion
or impact
detected
Motion Motion
Detection detected
Impact
detected
14
When you press the REC button, a video will be recorded for
1 minute, from 10 seconds before to 50 seconds after pressing the
button, and stored in the "manual_rec" folder.
Record settings.
>
Monitors movement in the area or impacts to the vehicle. Video will
be recorded only when motion or an impact is detected.
When a moving objects is detected while parking, a video is recorded
for 20 seconds, from 10 seconds before detection to 10 seconds after
detection, and stored in the "motion_timelapse_rec" folder.
When an impact is detected while parking, a video is recorded
for 20 seconds, from the moment 10 seconds before detection to
10 seconds after detection, and stored in the "parking_rec" folder.
Operation description
Operation description
Status LED
(flickers quickly)
STATUS LED
(flickers slowly)
(flickers quickly)
(flickers quickly)