Using The Super Night Vision Feature - Thinkware F70 PRO User Manual

Option
No impact
detected
Time
Lapse
Impact
detected
No impact
detected
Energy
Saving
Impact
detected
Disabled
If parking mode settings are changed, the videos recorded with the previous settings will be deleted. To
prevent data loss, back up all parking mode videos before changing parking mode settings.

3.6 Using the Super night vision feature

With the Super Night Vision feature, you can record videos that are much brighter than videos recorded
without this feature. This feature is enabled by real-time image signal processing (ISP) to improve the
brightness of videos recorded.
<When Super Night Vision is deactivated>
1
From the mobile viewer, tap Dash Cam Settings
2
From Super Night Vision, select the desired recording mode to use the Super Night Vision feature. The
new setting is applied automatically.
The Super Night Vision feature is only supported in parking mode.
A videos is recorded at a rate of 2 fps for 10 minutes, compressed into
a 2-minute long file, and stored in the "motion_timelapse_rec" folder.
Since the video file recorded with this option is small, you can record
a long video.
When an impact is detected while parking, a video is recorded for
100 seconds at a rate of 2 fps (from the moment 50 seconds before
detection to 50 seconds after detection) and stored in the "parking_
rec" folder after being compressed into a 20-second long file. (The
buzzer will sound.)
Monitors impacts to the vehicle. Video will be recorded only when an
impact is detected.
When an impact is detected while parking, a video is recorded for
20 seconds from within 1 second after detection and stored in the
"parking_rec" folder.
The product is powered off when electric accessories and the engine
are turned off.
Operation description
<When Super Night Vision is activated>
Camera Settings.
>
Using recording features
STATUS LED
(light on)
(flickers quickly)
Off
(flickers quickly)
Off
15