Factory Default - Miele G 4263 VI Active Operating Instructions Manual

Factory default

If you have altered any settings from the
factory default, you can re-set them
back to the factory default settings.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in, and whilst holding it in switch
the dishwasher on using the  but-
ton.
Keep the programme selector button
 pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Programme options
 Press the Turbo button 12 times.
The Turbo indicator light will do one
long flash and two short flashes at in-
tervals.
The flashing sequence in the display in-
dicates whether a setting has been
changed from its factory default.
–  : All settings are set to factory de-
fault settings.
–  : At least one setting has been
changed.
 To reset the dishwasher to the factory
default settings, press the pro-
gramme selector button .
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.
55