Adjust Automatic - Miele G 4263 VI Active Operating Instructions Manual

Programme options

Adjust Automatic

You can adjust the Automatic pro-
gramme so that it will remove stubborn
soiling in a lightly soiled load.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in, and whilst holding it in switch
the dishwasher on using the  but-
ton.
Keep the programme selector button
 pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
If this does not happen, start the pro-
cedure from the beginning again.
52
 Press the Turbo button 5 times.
The Turbo indicator will flash rapidly 5
times at intervals.
The flashing sequence in the display in-
dicates whether Adjust Automatic is ac-
tivated or not.
–  : "Adjust Automatic" activated
–  : "Adjust Automatic" deactivated
 Press the programme selector button
 to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.