Pair Multiple Terminals To One Base - Moneris Go Plus Getting Started Manual

8. When the "Pair successfully" message appears, tap OK.
Note: Green light on the left side of the base indicates base is
connected with the paired terminal.
The base connectivity information screen appears.
Note: Base may complete an update.
9. Tap the white circle in the navigation bar at the bottom to go to
the terminal screen.
The pairing process is complete.
Note: If the "Communication error, failed to pair the base!"
message appears, tap OK and retry.

Pair multiple terminals to one base

You have already paired the primary terminal. Now, you can pair another terminal to the base. It is important
to note that the communication base will only remember the last paired terminal. It is best to use the
terminal with the base it is paired with. Follow the instructions below to pair the next terminal.
Moneris Go Plus Integrated: Getting Started Guide 25