Emerson IC695PNS001-BHBF1 2 Important Product Information page 19

GFK-2738AE
Problems Resolved by this Revision
Subject
IC695PNSx01
Overtemperature resets
Functional Compatibility
The following CPU firmware, programming software, and backplane hardware versions are required to use the
features introduced in the most recent PNS release:
Description
Subject
Feature
Single fiber break
detection
IC695CMM002/004,
IC695PSD180 support
Sequence of Events
with Five PNS101s
PNS101 &
CPE400/CPL410
Sequence of Events
with MDL655/MDL660
PNS101 & CPE330
Sequence of Events
Firmware
with MDL655
Version
PNS101 & CPE330
Sequence of Events
with MDL660
PNS001-Bxxx
PNS001-Axxx
(Most Recent Release)
9 HART Pass Through COMMREQ feature not supported on RXi Controller. Refer to future RXi Controller IPI for updates.
Defect Description
DE10626 The IC695PNS001-Bxxx or IC695PNS101 could incorrectly indicate an
overtemperature condition and reset even when the operating
temperature is within normal ranges.
Minimum PNS
Version Required
PNS001-Bxxx/PNS101
Release 3.40
PNSx01-Bxxx/PNS101
Release 3.35
PNS101 Release 3.30
PNS101 Release 3.26
PNS101 Release 3.25
PNS101 Release 3.10
PNS001-Bxxx Release
3.00
PNS001-Axxx Release
2.41
Minimum Version Required
CPE330 Release 10.30
CPE400/CPL410 Release 10.30
CPE302/305/310 Release 10.30
CPE330 Release 10.30
CPE400/CPL410 Release 10.30
CPE302/305/310 Release 10.30
CPE330 Release 10.15
CPE400/CPL410 Release 10.15
CPE400/CPL410 Release 10.10
CPE330 Release 9.60
CPE330 Release 9.60
CPU320/CPU315 Release 8.95
CPE310/CPE305 Release 8.95
CRU320 Release 8.95
CPE330 Release 8.95
CPE400 Release 9.00
CPL410 Release 9.55
CPE100 Release 9.15
CPE115 Release 9.45
RXi Controller Release 7.80
CPU320/CPU315 Release 8.95
CPE310/CPE305 Release 8.95
Jan 2024
9
7