System Information; Component Description - Lippert Titan Leveling Systems Installation Manual

System Information

The four-point, four-valve hydraulic leveling system is a hydraulic system which includes four points of
contact utilizing jacks (Fig. 1) and a four-valve system. A 12V DC electric motor drives a hydraulic pump (Fig.
6) that moves fluid through a system of hoses, fittings and jacks to level and stabilize the coach. Mechanical
portions of the hydraulic leveling system are replaceable. Contact Lippert to obtain replacement parts. The
hydraulic leveling system is primed and tested at the factory. However, the system is shipped dry to avoid
hazardous material restrictions.

Component Description

1. Jacks
A. (4) 8K, 13" stroke , aluminum jacks (Fig. 1)
B. Rated at a lifting capacity for the coach.
C. Standard 9-inch diameter (63.5 square inch) footpad on a ball swivel for maximum surface contact
on all surfaces.
D. Operational powered from a 12V DC motor/pump assembly.
2. Motor/Pump Assembly
A. 12V DC motor
B. Hydraulic fluid reservoir tank
C. Control valve manifold
D. Solenoid valve
3. System Controls
A. Controlled electronically from the touchpad.
B. Touchpad can be operated in manual mode or fully automatic mode.
4. Fittings and Hoses
A. Fittings - J.I.C. - Size 4
1/4
B. Hose - " I.D., 3000 psi - W.P. Rated
Rev: 10.23.23
Fig. 1
18"
Page 3
CCD-0005481