Turbo Timer Mode - CrimeStopper EZEE START EZ-45DP Operating Instructions Manual

selectable by your installer.
The optional Turbo Timer mode allows the EZEESTART system to keep a Turbo or Turbo Diesel vehicle
running for 1 to 5 minutes [selectively] after you remove the key, exit the vehicle, and lock the doors remotely.
This is handy for turbo cool-down without the need for expensive turbo timers. This mode requires the use of
an extra part called a momentary switch/button that is not included with the kit. Check with your installer about
adding this feature.
NOTE: The turbo timer button will also trigger a remote start if it is inadvertently pressed when the vehicle is
not running. Please note this when installing the button and choose a location out of harm's way.
1) Engine should be running with the key.
2) Press and hold down the brake pedal.
3) Press your "Turbo Timer" button 1 to 5 times for each minute of run time you desire. (1 press = 1 min.)
4) As you release the brake pedal and your system will confirm by flashing the lights the same number of
times the button was pressed.
5) Turn Ignition switch OFF, remove key and exit the vehicle. Remote lock your doors for safety. The engine
should remain running for the selected number of minutes.
TURBO TIMER MODE (OPTIONAL)
8