Vehicle Operation; Troubleshooting "Before You Call - CrimeStopper EZEE START EZ-45DP Operating Instructions Manual

1-way paging remote engine starting & keyless entry system with 5 button sidekick remote control

Hide thumbs Also See for EZEE START EZ-45DP:

IGN

OFF

WAIT FOR

(BLUE WIRE GROUNDED)

4 FLASHES

PRESS 4X's

IGN

OFF

START

FLASH 2, 3, or 4 X's

2-VEHICLE OPERATION

A single remote can control two different vehicles EZEESTART systems installed. However, both systems must be

the same type. EZ-45DP/55DP are only compatible with each other.

Programming:

You must first Programming your remote for 2

vehicle operation:

Vehicle Programming and Operation instruction):

In step #4 of transmitter programming (see page 11) press and hold middle button #5 for 2 sec., then press the lock

button, parking light will flash indicating the remote is programming.

Operation:

Press vehicle #2 button (middle button) for 2 sec. and within 3 seconds press any of the 4 function buttons on your

remote. You can keep pressing function buttons to control car #2 as long as it is within the 3-second window. After 3

Table of Contents

Ezee start ez-55dp