Eiki EK-700LUL Owner's Manual page 13

About High Altitude mode
● Set [HIGH ALTITUDE] to [ON] in the Setting menu when using the projector at altitudes ap-
proximately 1700 meters or higher.
Using the projector at altitudes approximately 1700 meters or higher without setting to [HIGH
ALTITUDE] can cause the projector to overheat and the protector could shut down. If this
happens, wait a couple minutes and turn on the projector.
● Using the projector at altitudes less than approximately 1700 meters and setting it to [ON] can
cause the light module to overcool, causing the image to flicker. Switch [FAN MODE] to [OFF].
● Using the projector at altitudes approximately 1700 meters or higher can shorten the life of
optical components such as the light module.
Safety Labels
The caution and the explanatory labels of the LASER PRODUCT in CLASS 1 conforming to IEC
60825-1 Second edition, and in Class 1 conforming to IEC 60825-1 Third edition are stuck on the
below indicated positions.
Label 1
Label 1
Safety operation guideline
Label 2
Label 2
520065000
13