Download Print this page

Advertisement

Quick Links

USER CARD
Plus Handset
Status
Control
Emergency
Microphone
PTT
Volume
Up
Down
DC Charging
Accessory port
3.5 jack
Status LED
Default - Transmitting on radio
X
Flashi n g - Not connected
Talkaround - transmitting local l y
Handsfree mode active
Relay mode wi t h GW connected
X
Flashi n g - Not paired
(Relay mode acti v e)
Remote Relay mode handset
Remote PTT active
(or programmi n g mode)
Al t ernating - Find Me active
Download XGALA Alignment tool, User Manual & User Card: @ www.x10dr.com
Plus Gateway Charger
Function
Button
Status Light
Active
Find Me
Antenna
3.5mm jack
port
(180mV)
XIC Interface connector
Antenna
XRTG-EX2
Elite Plus External
Rooftop Gateway
XIVG
Internal gateway
Active
Find Me
XEBC
external battery cable
90cm Hirose to USB-A
(use with powerbank).
Warning: Product contains Neodymium, rare earth magnets, keep away from credit cards or like items that might be damaged by strong magnetic fields.
v5
HANDSET FUNCTIONS
Off/On: Long press (~2 seconds) to turn On/Off.
Search: Short press to connect/reconnect to another paired
gateway or a handset
Status light: Glows solid when operational. Flashes when
"out of range" or gateway is powered Off.
Volume up: Short press adjusts speaker louder.
Long Press to activate /deactivate Relay Mode.
Volume down: Short press adjusts speaker softer - OFF is minimum programmable setting.
Microphone: Talk at normal strength about 1- 3cm (~1") from mic.
PTT: Radio Press to talk*
Emergency: A confirmation beep sounds when pressed*
emergency function. Press button as per mobile radio's emergency operating instructions
or as advised by your supplier.
Control: Default configured as Talkaround PTT*
for Main Radio PTT, 2nd Radio PTT, PA Talk or Toggle Side PTT button between radio and
talkaround/ 2nd Radio PTT or PA talk etc). Confirmation tones will sound when pressed * .
Handsfree: Quickly double press the assigned Talkaround button to enable. LED will change
to purple. A reminder beep will sound every 30 secs. Single press to disable.
DC charging: Handset sounds 3 beeps every 5 minutes when charging is required. Handset
beeps to notify correct seating when handset first placed in gateway. The handset's status
LED may blink every 10 secs to indicate "charging" status. Solid blue means complete.
Speaker: Delivers received speaker audio - Handset normally mutes when inserted into
gateway, mobile or desktop charger or when a headset or earpiece is plugged in.*
Headset connector: Use with X10DR headsets/earpieces and accessories** fitted with Hirose
HR10 Plus connectors. External battery charging also connects here.
HANDSET FUNCTIONS
Mandown Monitor Mode: When fitted and activated, the Mandown function turns on
automatically whenever you remove the handset from its charger. If there is no user
movement or transmit activity for 2 minutes, quickening alert tones will sound for 30 seconds.
If there is still no user activity, the radio's emergency input will be triggered. To temporarily
disable Mandown operation, either power up the handset or remove it from its charger
while pressing the top grey Control button until a 4 beep "pause" confirmation sounds. A
gentle reminder beep will sound every 2 minutes until re-enabled. To re-enable Mandown,
either power off/on the handset or place the handset into a charger and then remove.
Mandown is disabled when the handset is placed into any charger/gateway.
External battery: Simply plug in a USB cellphone style external battery power bank via the
optional XEBC battery adaptor cable to the headset & external battery port. The handset
LED will 'blink' every 10 seconds to indicate it is being re-charged. You can continue to use
the handset as normal. Replace or remove exhausted power banks when re-charged as
desired. Does not effect Mandown operation.
GATEWAY FUNCTIONS
Function Button: Long Press used to manually turn the gateway Off/On.
Find Me™ - Fast double press. Short press to reset.
Status light: Glows solid when operational. Flashes when handsets are "out of range" or off.
Flashes blue/Red when Find me is activated.
Antenna Connector: Connect long-range external XMPA or short range internal XSMA2.
3.5 Audio Out: Provides line level 180mV RMS. Intended for connection
to a PA system. The handset Control button is usually configured to
make public address broadcasts.
* See Programming Parameters Guide for configurations. Some tones can be enabled/disabled.
** Elite Plus model feature only.
# When out of range the unit will sound a low frequency tone alert when pressed.
.
(Relay mode)
- May be configured to toggle between Radio <> Talkaround PTT.
#
(continued)
(Requires use of XSJB accessory)
Elite Plus models
and then triggers host radio's
#
button. Can alternatively be configured
#
Wear here for
best performance
(Elite Plus models only).

Advertisement

loading
Need help?

Need help?

Do you have a question about the X10DR and is the answer not in the manual?

Questions and answers

Summary of Contents for Wireless Pacific X10DR

  • Page 1 Remote PTT active Headset connector: Use with X10DR headsets/earpieces and accessories** fitted with Hirose (or programmi n g mode) HR10 Plus connectors. External battery charging also connects here.
  • Page 2 To significantly enhance in-to-building coverage, two Elite Plus handsets are all capable of “relay” mode. This unique X10DR Elite Plus capability means that a handset, when out of range from the vehicle’s gateway, can still communicate via a still in-range ‘relay’ handset. There are two operational relay modes: Command Relay and Automatic Dynamic Relay mode.