Table of Contents
Advertisement
EN
1.
Select the cross-section of the cable corresponding to the length:
• Length < 7.5 m: 1.5 mm²
• Length > 7.5 m: 2.5 mm²
2. Plug the 4-pole plug of the receiver into the IR socket of the air conditioner (Fig. ,1).
Fig.
on page 8
3. Connect the 230 V cable (Fig. ,2) to a power supply using the fast connectors.
Fig.
on page 8
4. Optional: Connect the DC-Kit (Accessories) and/or LIN bus of the vehicle to the under-bench air conditioner.
Follow the manufacturer's instructions.
Fig.
on page 9
Table 1: Legend
Installing the air ducting
Note Do not use short-cuts when installing inlets and outlets under the vehicle. Otherwise the un-
der-bench air conditioner will draw the discharged air back in. The drawn-in air circulates in the un-
der-bench air conditioner and affects the efficency and the distribution of the air in the vehicle.
Placement of the air ducting for efficent cooling:
Placement of the air ducting for efficent heating:
1.
Install air ducting (Fig. /Fig. ,1) and ventilation pipes (Fig. /Fig. ,3).
Note
• When installing the air ducting, take into account that the air ducts can be optimally placed only
• It is recommended to use cardboard pipe for air conditioning with an aluminium core and ex-
Follow the manufacturer's instructions.
2. Ensure that the ventilation pipes (Fig. /Fig. ,3) are connected by pressing them together using the conical
hole on the air outlet.
24
Pin
1
2
3
4
5
6
for cooling or heating, and not for both at the same time.
ternal covering of PVC. The nominal inside diameter should be 60 mm. The outside diameter
should size up to 65 mm.
DC-Kit
Description
Ground
Ground
Ground
Economy
Remote On
Inverter
Fig.
on page 9
Fig.
on page 9
LIN
Ground
Ground
Ground
Ground
NC
Ground
Advertisement
Chapters
Table of Contents
