Recording Tv Programs Using Vcr Plus - Sony SLV-AV100U Operating Instructions Manual

Recording TV
programs using VCR
Plus+
VCR Plus+
Number
buttons
SET
TIMER REC
ON/OFF
TIMER"
CLEAR
TAPE SPEED
(SP/EP)
Tip
* To cancel the procedure,
press VCR Plus+ before
pressing ENTER.
Note
* If the unit's VCR beeps
repeatedly, the Plus Code is
incorrect.
Just enter the program's Plus Code listed in the TV program guide. The
date, times and channel number of that program are set automatically.
You can preset up to eight programs at a time.
Before you start...
¢ Check that the unit's clock is set to the correct time.
¢ Insert a tape with its safety tab in place. Make sure the tape is longer
than the total recording time.
¢ Press VHS TUNER.
— If the TV doesn't turn on or the LINE 1 is not selected on the TV,
turn it on manually.
— If connected with only the antenna cable, set the TV to the video
channel manually.
~ When using a cable box, turn it on.
1 Press VCR Plus+.
PlusCode TAPE ere
SET : keys
SP/EP : {TAPE SPEE
2 Press the number buttons to enter
the program's Plus Code. PlusCode_ —TAPE_SPEED
If you make a mistake, press TIMER (RRELIDATLY — WEEKLY)
CLEAR and enter the correct number.
3 Lift the top cover of the remote
commander, then press TAPE
SPEED to select SP or EP.
4 press CURSOR </=> to select
ONCE, DAILY or WEEKLY.
(OROE "DAILY WEEKLY)
To record Select select: (Es
Once a week -- -WEEKLY
continued
Basic VCR / Radio Operations 51