Sony SLV-AV100U Operating Instructions Manual page 54

If VCR Plus+ is not available in your area, follow the instructions below
e Check that the unit's clock is set to the correct time.
¢ Insert a tape with its safety tab in place. Make sure the tape is longer
than the total recording time.
e Press VHS TUNER.
~— If the TV doesn't turn on or the LINE 1 is not selected on the TV,
turn it on manually.
— If connected with only the antenna cable, set the TV to the video
channel.
¢ When using a cable box, turn it on.
VHS TUNER
1 Lift the top cover of the remote REESE
TIMER SET 7 CHECK
commander. TUNER PRESET
CLOCK SET
SET VCR Plus+ CHANNELS.
Press MENU. Then press CURSOR CABLE BOXCONTROL
ADVANCED OPTIONS
41% to move the cursor (I) to VHS ser Beoute
MENU, and press EXECUTE. * a
2 ~~ Press CURSOR ¢/$ to move the
cursor (1) to TIMER SET/CHECK,
then press EXECUTE.
MENU
EXECUTE 3 Set the date, start and stop times,
TIMER REC channel number, and tape speed:
To correct a setting, press CURSOR
@ to return to that setting and reset.
To record the same program every
Tip day or on the same day every week,
® To set the channel, you can 3
press CURSOR ¥ while the date is
also use the CH/PRESET +/ highlighted. For details, see "Daily /
eorauiner Pultone. weekly recording" on the next page.
Notes ,
° "TIMER" flashes in the To record from a DSS receiver or
TV programs from the
unit's VCR tuner, or LINE
input sources. 4 press CURSOR = to confirm the
' setting.
The cursor (I) appears at the beginning
of the line. To enter another setting,
move the cursor to the next line and
repeat step 3.
54 Basic VCR / Radio Operations