Sony SLV-AV100U Operating Instructions Manual page 20

Step 5
Hookup 6: VCR setup
1 Set the RF UNIT switch to CH 3 or CH 4, whichever
channel is not used in your area. If both are used, set
the switch to either channel.
For details, see page 92. If you made V connection
(from page 12), you can skip this step.
RF UNIT
CH3
CH4
[eave coco © |
2 Set the A/B switch to "A."
3 Press EASY SET UP on the VCR.
@ The CLOCK SET menu appears. Set the date and time
and press EXECUTE. For details, see page 33.
ET UP CLOCK SET
(29/4 71997 WED 12:00
SELECT : (#4
SET 1
[e *
NEXT : (EXECUTE!
@ The CABLE BOX CONTROL menu appears. Select
OFF and press EXECUTE. For details, see page 35.
CABLE BOY
CABLE BOX CONTROL
CABLE MOUSE [ON SFE
: fes
+ [EXECUTE
© The TUNER PRESET menu appears. Set ANTENNA/
CABLE to CABLE and press EXECUTE. For details,
see page 39.
: (EXECUTE
CANCEL : [EASY SET_UP|
28 Getting Started
TV antenna or cable hookups (continued)
© The AUTO PRESET starts.
AUTO PRESET
EXECUTING
NAbthbbta,
Please wait—
Seti
© After completing AUTO PRESET, the CENTER MODE
selection menu appears.
Select the center mode, and press EXECUTE.
For details, see page 30.
CENTER MODE
© The TEST TONE selection menu appears.
Set the volume of the center and rear speakers and
press EXECUTE.
For details, see page 31.
ET Ul
TEST TONE
SET UP is done
SELECT :
END :
4
Normal display
4 Preset the cable box output channel (usually 2, 3 or
4). For details, see page 35.
@ Press MENU. Then press CURSOR #/¥ to move the
cursor (8) to VHS MENU, and press EXECUTE.
@ Select TUNER PRESET.
TIMER SET / CHECK
TUNER PRESET
CLOCK SET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
ADVANCED OPTIONS
SELECT :
© Enter the cable box output channel. Set MANUAL
SET to ADD and press EXECUTE.
TUMER PRE SET
ANTENNA / CABLE/A
AUTO PRESET
fASNUAL SET
AFT
FINE TUNING
SELECTCH - :
ADD/ERASE -