Sony SLV-AV100U Operating Instructions Manual page 90

Editing
Recording from
another VCR or LD
player
a a Se es os os oY ee ee
qa peso ccna s =f] a
ee
EDIT | VHS VIDEO
Il PAUSE @ REC
Tips
¢ To cut out unwanted
scenes while editing,
press If PAUSE on the
unit when an unwanted
scene begins. When it
ends, press If PAUSE
again to resume recording
(Assemble Editing).
You can record audio sound
from the desired input
source on the video tape by
pressing AUDIO repeatedly
in step 4.
Note
* If you follow this procedure
to start recording, the unit's,
VCR won't record with the
APC function. To record a
tape with the APC function,
press @ REC again during
recording pause in step 2 so
the unit's VCR analyses the
tape. Then when you start
recording in step 6, press
§l PAUSE after the APC
indicator stops flashing. If
you press ll PAUSE before
the APC indicator stops
flashing, the APC function is
cancelled.
90 Editing
Before you start editing
* Connect another VCR or LD player to the unit referring to the
connections on pages 8 and 9.
e Press VHS TUNER.
~ If the TV doesn't turn on, turn it on manually.
— If connected with only the antenna cable, set the TV to the video
channel.
¢ Press TAPE SPEED to select the tape speed, SP or EP.
¢ On this unit, set the EDIT switch to ON. If the other VCR has a
similar switch, set it to ON as well.
¢ Do not use the remote commander in the following procedure.
1 insert a tape with its safety tab in
place into the unit (recording
VCR).
Search for the point to start
recording and press Il PAUSE.
2 Press @ REC on the unit to set it to
recording pause.
3 -« Inserta source tape with its
safety tab removed into the
other (playback) VCR when
recording from another VCR.
¢ Insert an LD into the LD player,
when recording from an LD
player.
4 Press VIDEO or VHS repeatedly to
select the input (playback) source
(VIDEO1, VIDEO2, or LINE).
5 Search for the point to start
playback and set it to playback
pause.
6 tostart editing, press 11 PAUSE on
this unit and release the pause
mode on the other equipment at
the same time.
To stop editing
Press the i STOP buttons on both units.