Tone Quality Adjustment Tape Recording; Tape Dubbing; Monitoring While Recording; Notes On Output - Sony TA-F530ES Operating Instructions Manual

1
2
• 0
®
(TI)(TI)
0
@
!®
0 0
Turntable system
Tuner
CD player
Cassette deck
Cassette deck
(for recording)
Tape Dubbing
For TA-F530ES/F222ESR/F730ES/F333ESR
The program source selected by the REG OUT SELECTOR is
simultaneously output through all systems of the REG OUT
jacks.
When units such as tape recorders and a hi-fi video cassette
recorder are connected to the REG OUT jacks of the TAPE 1, 2
(and 3) and the units are set in recording mode, the same
program source can be recorded on all the units atthe same
time.
For TA-F630ESD/303ESD
When the REG OUT SELECTOR is set to DIGIT AL and
DIGITAL INPUT SELECTOR to OPTICAL 1 or COAXIAL, the
program source is simultaneously output through all the REG
Monitoring While Recording
When a 3-head tape recorder is used, the recording result
(playback sound) can be monitored while recording.
When the recording is performed on the tape recorder
connected to the jacks of TAPE 1 , the recording sound can be
monitored by setting the INPUT SELECTOR to TAPE 1.
12
1
Turn ON the power of the unit and the connected
equipment.
(Be sure to confirm that the power/standby indicator is turned
to green from red.)
2
Select desired program source for recording.
(See the diagram on the right.)
3
Play the program source to be recorded.
4
Set the cassette deck in the recording mode.
OUT jacks. For other selected program source, the signal is
output through REG OUT jacks of the TAPE 1 and TAPE 2
simultaneously.
Note for TA-F730ES/F333ESR
Tape dubbing from the tape recorder connected to TAPE 1 to
the recorders connected to TAPE 2 and 3 can not be performed.
Note for T A-F630ESD/F303ESD
Following tape dubbing can only be performed:
OPTICAL 2 (DAT) to TAPE 1, TAPE 1 to TAPE 2, and TAPE 2
to TAPE 1.
Digital dubbing from CD player to DAT deck cannot be
performed.
Notes on Output
These units are provided with two separate circuits for recording
output signals (through the REG OUT jacks) and for speaker
(headphones) output signals.
The settings of sound level and tone quality controls have no
effect on the recording. (In case the MODE selector is set to
MONO or a program source having a high output impedance is
connected to the unit, monaural signals will be output for
recording.)
While recording a program source, you can enjoy another sound
source by setting the INPUT SELECTOR (and DIGITAL INPUT
SELECTOR). As to the operations, see page 10.